Instruction Manual

3
Do not allow the supply hoses to
twist.
Twisted supply hoses may become
loosened from the faucet, which
may cause water damage.
Installation
Place the faucet, escutcheon, and sealing ring on the
mounting surface.
Install the fiber washer, friction washer, and mounting
nut.
Orient the faucet as desired, then tighten the mounting
nut. Tighten the tensioning screws.
Connect the hoses to the stops, using 3/8" compres-
sion fittings (not included). Use two wrenches, as
shown, to prevent the hoses from twisting.
Install the drain.
Turn on the water and check all connections for leaks.