Instruction Manual

2
Installation Considerations
For best results, Hansgrohe recommends that this unit
be installed by a licensed, professional plumber.
Please read over these instructions thoroughly before
beginning installation. Make sure that you have all
tools and supplies needed to complete the installation.
•
•
Technical Information
Recommended water pressure 14.7 - 72.5 psi
Recommended hot water temp. 120� - 140� F*
Max. hot water temp 165�F*
Hole size in mounting surface 1 3/8"
Max. mounting surface depth 1 1/2"
Flow rate -- lavatory 1.5 gpm
Flow rate -- bidet 2.2 gpm
3/8" supply hoses - requires 3/8" compression fitting (not
included)
*Please know and follow all applicable local plumbing codes when setting
the temperature on the water heater.
Axor Citterio Lav Mixer 39010XX1
Axor Citterio Bidet Mixer 39200XX1
39010XX1 39200XX1
Caution: Do not bend or twist
the supply hoses!