Installation Instructions / Warranty Metris 31063XX1 Metris 31263XX1 Talis 32310XX1 Focus 31730001
Metris Widespread Lavatory Faucet Metris Widespread Bidet Faucet Talis S Widespread Lavatory Faucet Focus Widespread Lavatory Faucet 31063XX1 31263XX1 32310XX1 31730XX1 Product Specification Requires 1/2” supply lines (not included) Max. mounting surface thickness Hole sizes in mounting surface Spout 1 3/8” Valves 1 1/4” Max. incoming water pressure Recommended incoming water pressure Max. incoming hot water temp. Recommended incoming hot water temp. Max.
2310XX1 31730XX1
Installation Remove the valve mounting nuts from the valves. From below the mounting surface, push the valves up into the holes. Install the mounting nuts on the valves. Tighten the tensioning screws. Place the handles over the valve mounting nuts. Tighten the handles by rotating the escutcheons clockwise. Install the spout. Tighten the mounting nut. Tighten the tensioning screws.
Screw the connecting hoses into the spout tee. Slide the 3/8” compression nuts and ferrules over the ends of the hoses. Connect the hoses to the valve outlets. Use two wrenches so that the hoses do not twist or become loosened from the spout tee. Install the supply lines (not included). Install the drain. Turn on the water and check all connections for leaks.
Install the pop-up drain Remove the plunger assembly. Unscrew the drain outlet flange from the tee. plunger Unscrew the tailpiece from the tee. Wrap the threads with two layers of Teflon tape and replace. height adjuster flange Install the white, flexible sealing gasket on the flange. Place it in the sink outlet. From under the sink, install the black mack gasket, white friction ring and retainer nut to the flange. Do not tighten the nut against the bottom of the sink at this time.
Replacement Parts 10 13 15 7 8 14 11 1 12 4 9 2 3 5 1 6 Metris 2 3 4 5 6 7 8 9 10 11 12 13 14 15 handle - hot handle - cold valve set hot cartridge cold cartridge connection hose 3/8” compression ftg aerator pull rod spout mounting kit spout spout escutcheon o-ring 11 x 2 bidet spout aerator ball joint 97503XX0 97502XX0 97960001 94009000 94008000 94071001 88513000 13085000 96657XX0 13961000 97504XX0 97505XX0 98127000 97506XX0 97360XX0 97362XX0 XX = finish 00 = chrome 82 = brushed nickel
7 8 8 11 11 12 12 4 4 2 3 9 3 5 6 6 Talis 5 Focus 2
Cleaning Recommendation for Hansgrohe Products Modern faucetry and shower products utilize a combination of materials to comply with the needs of the market with regard to design and functionality. To avoid damage, it is necessary to use some caution when cleaning. Damage caused by improper treatment is not covered under the Hansgrohe warranty. Cleaning Materials for Faucets and Showers • • • • To remove lime scale, use only products made specifically for that purpose.
Limited Lifetime Consumer Warranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either the United States or Canada. WHO IS COVERED BY THE WARRANTY This warranty extends to the original consumer purchaser only. This warranty is non-transferable.
When warranty service is completed, any repaired or replacement product or part will be returned to you postage prepaid. EXCLUSIONS AND LIMITATIONS REPAIR OR REPLACEMENT (OR, IN LIMITED CIRCUMSTANCES, REFUND OF THE PURCHASE PRICE) AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER. HANSGROHE NEITHER ASSUMES NOR AUTHORIZES ANY PERSON TO CREATE FOR IT ANY OBLIGATION OR LIABILITY IN CONNECTION WITH THIS PRODUCT.
www.hansgrohe-USA.com US - Installation Instructions • Part No. 90597301 • Revised 05/2007 Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 Tel.
