Installation Instructions / Warranty Downpour 27474XX1 27476XX1 27479XX0 Raindance 27493XX1 15” 27413XX1 9” 27422XX1 Axor Citterio M 27412XX1
7474XX1 27476XX1 27479XX0 27413XX1 27422XX1 27493XX1 27412XX1 Technical Data – 27474XX1/27476XX1/27493XX1 Max. flow rate 2.5 gpm Note to users in Massachusetts: The maximum output temperature of the shower valve can be no higher than 112° F. Installation Considerations • For best results, Hansgrohe recommends that this unit be installed by a licensed, professional plumber. • Please read over these instructions thoroughly before beginning installation.
Installation – 27479XX0 The extension pipe requires a 1/2" NPT male nipple, extending 5/8" outside the finished ceiling surface. Seal the ceiling around the nipple with waterproof sealant. Failure to seal the ceiling can lead to possible water damage. Wrap the threads on the ceiling nipple with Teflon tape. Hold the escutcheon against the ceiling. Screw the extension pipe onto the nipple.
Installation – 27413XX1/27422XX1/27412XX1 The showerarm requires a 1/2" NPT male nipple, extending 5/8" from the surface of the finished wall. Seal the wall around the nipple with waterproof sealant. Failure to seal the wall can lead to possible water damage. Wrap the threads on the nipple with Teflon tape. Screw the showerarm onto the nipple.
Installation – 27474XX1/27476XX1/ 27493XX1 Screw the showerhead to the showerarm or extension pipe. Tighten with a wrench. Do not overtighten, or damage may result. Tighten the safety screw using a 2 mm Allen wrench. Turn on the water and check the connection for leaks.
Scale Removal The Raindance and Downpour showerheads use the Quick Clean™ cleaning system. Turn the water on lightly and rub the spray channels with a finger or a sponge to dislodge any scale deposits. To remove scale buildup on the spray face, pour about 3/4" of a commercial scale remover, such as Lime-Away™ or CLR™, into a shallow dish. Always follow the label instructions on the scale remover. Soak the spray face in the solution. Rinse the showerhead with clear water. Install the showerhead.
Clean the air nozzle Remove the pivot ball assembly using a strap wrench*. *available at hardware stores Remove the retaining ring. Unscrew the air nozzle screw.
Soak the air nozzle in a commercial scale remover, such as LimeAway™ or CLR™. Always follow the label instructions on the scale remover. Rinse the nozzle with clear water. Install the air nozzle. Tighten the screw.
Install the retaining ring. Install the pivot ball assembly. Tighten using a strap wrench.
Cleaning Recommendation for Hansgrohe Products Modern lavatory faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain criteria when cleaning.
THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship. B. Conditions, malfunctions or damage resulting from (1) normal wear and tear, improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration, or (2) the use of abrasive or caustic cleaning agents or “norinse” cleaning products, or the use of the product in any manner contrary to the product instructions.
www.hansgrohe-usa.com US - Installation Instructions • Part No. 90647706 • Revised 9/2008 Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 Tel.
