Manual

7
Cut the o-rings on the end of the Secuflex hose.
Push the handshower holder down into the Secuflex
holder. The pin on the Secuflex holder should engage the
hole in the bottom of the handshower holder.
Secure the handshower holder by turning the escutch-
eon clockwise, so that it threads down onto the Secuflex
holder.
Place the handshower in the holder.
If the handshower becomes hard to pull out, spray a cloth
with some of the silicon lubricant and wipe the hand-
shower hose.
If the flow of water from the handshower diminishes over
time, remove and clean the screen washer.