Manual

4
English
Installation
Turn o the water at the main
before beginning.
Cut the plaster shield so that it extends ⅜" above the
surface of the nished oor.
Remove the ush insert.
Do not discard the screws.
(1) Position the tub ller on the rough.
(2) Pivot the tub ller, if necessary.
(3) Make sure that the tub ller is level.
(4) Connect the tub ller to the rough using the 6
screws (3 included with the tub ller, 3 reserved from
the ush insert).
1
4
3
2
8 mm
8 mm
1 2
3