Installation Instructions / Warranty 90550101 01/2005 Starck 10456XX1
Starck free-standing tub filler trim 10456XX1 Technical Specification Maximum water pressure Recommended water pressure Maximum hot water temp. Recommended hot water temp Max. flow rate @ 45 psi 145 psi 14.5 - 72 psi 176o* 120o - 140o* 5.8 gpm This unit is not anti-scald. If anti-scald capability is desired, is or required by local plumbing codes, install remote pressure balancing valve 13418181 to the hot and cold supplies before they go into the 10452181 rough.
Installation Instructions • Turn off the water at the main. • Cut the plaster shield so that it extends 3/8" above the surface of the finished floor. • Use an 8 mm allen wrench (not included) to remove the three screws from the flush housing. Remove the flush housing. Do not discard the screws. • Use the reserved screws to attach the trim to the rough. Pivot the top of the trim so that the spout faces the correct direction. Use a level to make sure that the unit is straight.
non-staining bathroom sealant suitable for the floor material. Gently guide the escutcheon to the floor. Insert a black rubber gasket in one end of the hose, and screw it to the hose outlet. Insert a second black rubber washer in the other end of the hose and screw it to the handshower. Seat the handshower in the handshower holder. User Instructions: • Pivot the lever handle up to turn the water on. Pivoting the handle to the left makes the water warmer, to the right makes the water cooler.
Service Parts 1 2 3 10 4 9 5 7 6 6 8 1 2 3 4 5 6 7 8 9 10 handle nut cover nut cartridge diverter aerator check valve handshower hose handshower holder handshower 10093XXX 96763XXX 97209000 92730000 96294000 96296000 94074000 28282XXX 96295000 28531XX1 5
Cleaning Recommendation for Hansgrohe Products Modern faucetry and shower products utilize a combination of materials to comply with the needs of the market with regard to design and functionality. To avoid damage, it is necessary to use some caution when cleaning. Damage caused by improper treatment is not covered under the Hansgrohe warranty. Cleaning Materials for Faucets and Showers • • • • To remove lime scale, use only products made specifically for that purpose.
THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship. B. Conditions, malfunctions or damage resulting from (1) improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration, or (2) the use of abrasive or caustic cleaning agents or “no rinse” cleaning products, or the use of the product in any manner contrary to the product instructions. C.
Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 Tel. 770 360-9880 • Fax 770 360 9887 www.hansgrohe-USA.
