Manual

8
15
14
13
• Feed the inner hose through the
handshower holder (1), liner (2), and
end cap (3).
• Screw the end cap (4) over the end of
the handshower holder.
• Continue pulling "out" on the inner
hose (5).
• Place the handshower holder retainer
ring (1) over the hose and the
handshower holder.
• Install the screen washer and the
handshower on the hose (2).
• Use a knife to cut the o-rings at the
end of the outer hose.
• Feed the hoses back through the
handshower mount.
• Place the handshower holder onto the
handshower mount so that the pin on
the mount engages the corresponding
hole on the handshower holder.