Manual

4
1
2
3
Installation Instructions
• Remove the plaster guards (1) from the
valve corners and the spout adapter.
• Install the glide rings (2)
• Install the handles (3) by pressing
firmly over the handle snap
connectors.
• Turn the handles clockwise to make
sure that the valves are in the "off"
position.
CAUTION: Do not install the handles
unless the snap connectors are screwed
firmly to the stems.
• Remove the plug from the spout
adapter using a 27 mm wrench.
• Lubricate the o-rings on the diverter
with the enclosed lubricant. Install the
diverter by pushing firmly straight
down into the spout adapter.
• CAUTION: Do not remove the female
fitting and the white plastic clip from
the top of the diverter assembly!
These parts are necessary for the
installation of the diverter knob.