Installation Instructions / Warranty 90550001 04/2005 Starck 10135XX1
Starck widespread lavatory faucet 10135XX1 Technical Specification Maximum water pressure 145 psi Recommended water pressure 14.5 - 72 psi Maximum hot water temp. 176o* Recommended hot water temp 120o - 140o* Max. flow rate @ 45 psi 2.2 gpm Max. deck thickness 1 3/8” Hole size in deck valves 1 1/4” spout 1 3/8” *Many municipalities require that the water heater be set no higher than 120o. Please know and follow all applicable plumbing codes when setting the temperature on the water heater.
• Thread on the escutcheons with orings. Install the red and blue color rings. Install the white plastic handle snap connectors with the screws.Press the handle firmly over the snap connector and push firmly downwards. • Seat the spout assembly with sealing ring on top of the mounting surface. From below, thread on the fiber washer, metal washer, and mounting nut. • Make sure that the spout assembly stands straight. Tighten the tensioning screws.
Install the pop-up drain: • Remove the plunger assembly. • Unscrew the drain outlet flange from the tee. • Unscrew the tailpiece from the tee. Wrap the threads with plumbers’ thread tape and replace. • Install the white, flexible sealing gasket to the flange. Sit it in the sink outlet. • From under the sink, install the black mack gasket, white friction ring , and retainer nut to the flange. Do not tighten the nut against the bottom of the sink at this time.
Service Parts 2 10 4 8 1 7 3 5 9 6 1 2 3 4 5 6 7 8 9 10 aerator handle color ring escutcheon cartridge fixation set snap connector pull rod 9/16” compression fitting spout 96911X X X 96318X X X 96319000 97285X X X 94008000 13961000 94184000 96657X X X 94158001 97363X X X 5
Cleaning Recommendation for Hansgrohe Products Modern faucetry and shower products utilize a combination of materials to comply with the needs of the market with regard to design and functionality. To avoid damage, it is necessary to use some caution when cleaning. Damage caused by improper treatment is not covered under the Hansgrohe warranty. Cleaning Materials for Faucets and Showers • • • • To remove lime scale, use only products made specifically for that purpose.
THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship. B. Conditions, malfunctions or damage resulting from (1) improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration, or (2) the use of abrasive or caustic cleaning agents or “no rinse” cleaning products, or the use of the product in any manner contrary to the product instructions. C.
Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 Tel. 770 360-9880 • Fax 770 360 9887 www.hansgrohe-USA.
