Manualshelf

Installation Manual

ManualsBrandsFabtech ManualsAutomotiveFabtech FTS92031 Adjustable Track Bar fits only from 6-10” lifts
123456
7. Center the axle accordingly using the adjuster sleeve on the track bar. After all adjustments have been
made lock down the adjuster sleeve with the cross bolts. It is important that the sleeve is locked down with
cross bolts perpendicular to the diff cover. SEE PHOTO BELOW
8. After the track bar is installed it may be necessary to a have vehicle Alignment preformed
9. Trimming of the cross member may be necessary to avoid contact with the new track bar. SEE PHOTO
BELOW