Instructions / Assembly

14
Shelterguard®
FASTENERS
Note the diagram below for proper installation of gasketed fasteners.
PROPER INSTALLATION OF GASKETED FASTENERS
correctly driven under-driven over-driven
Load Span Tables for 29 ga. Shelterguard®
ALLOWABLE LIVE LOAD (psf) for 29 ga. 80 ksi PANELS Purlin Or Nailer Spacing (ft.)
LOAD SPAN TABLE FOR 29 GA. Shelterguard®
ALLOWABLE WIND UPLIFT LOADS (psf)
Eaves and Endlaps - Roof Purlins
Intermediate Roof Purlins and All Siding
Listed above are the fasteners recommended for the proper installation of the Metal panels.
Fasteners Description Use
#9 x 1" Woodfast
Roof Panels
attached to Purlins
and Trim
#14 x 1" Woodtite
Roof Panels
attached to OSB or
Plywood and Trim
#9 x 1" Woodfast Wall Panel Screws
#9 x 2" Woodfast Ridge Cap Screw
Spans
1.0 1.5 2.0 2.5 3.0
3 OR
MORE
Load
(psf)
450 200 112 72 50
Substrate Fastener 9” 12” 15” 18” 21” 24”
¾” Plywood #14 x 1” MP 275.6 206.7 165.4 137.8 118.1 103.4
5/8” Plywood #14 x 1” MP 160 120 96 80 68.6 60
½” Plywood #14 x 1” MP 135.9 101.9 81.5 67.9 58.2 51
7/16” OSB #14 x 1” MP 61.5 46.1 36.9 30.7 26.3 23.1
19/32” OSB #14 x 1” MP 100.7 75.5 60.4 50.3 43.1 37.8
23/32” OSB #14 x 1” MP 115.9 86.9 69.5 57.9 49.7 43.5
Solid 2x SPF #9 x 1” WF 218.7 164.0 131.2 109.3 93.7 82
Solid 1x Pine #9 x 1” WF 168.4 126.3 101 84.2 72.2 63.2
Screws per Sq. 190 150 120 100 90 80
Note: Live loads are based on panel load capacity only and do not
apply to load capacity of trusses, purlins, or decking.