Instructions / Assembly

Step 3 (cont.)

When determining the number of fasteners needed, follow these GENERAL rules:

1. For every linear foot of roof panel ordered, you need 1 panel screw.

2. Remember, these are GENERAL rules; the actual amount may vary slightly for each differ-

ent roof application.

3. At this point, your materials list for Diagram A on page 7 should look like Sample E below.

SAMPLE E

Section A 19 pcs. X 12’

Section B 19 pcs. X 12’

5 pcs. Eave Trim 5/12p

3 pcs. Ridge Cap 5/12p

5 pcs. Gable Trim

600 pcs. #10 x 1” Waferhead Panel Screws

300 pcs #14 x 1” Mill Point screws

100 #12 x ¾” Stitch Screws

1 tube Sealant

3 Rolls Butyl Sealant Tape

1 each Hem Bending Tool (optional)

You are now ready to order your new metal roof. Simply ll out the following form and provide

it to your local FABRAL dealer or distributor. If you have any questions, or need to have your

material list checked, please contact your local FABRAL dealer or distributor.

HORIZON S - Order Form

Panels: Color = ___________

______ pcs. @ ______ ft. ______ in. ______ pcs. @ ______ ft. ______ in.

Accessories:

______ pcs. of Eave Flash ______ (ashing code ex: WEF1)

______ pcs. of Ridge Flash ______ (WRH3, WRH5)

______ pcs. of Gable Flash WGF4 ______ pcs. of Sidewall Flash WSW4

______ pcs. of Endwall Flash WEW2 ______ pcs. of Valley Flash RV2

______ pcs. of Transition Flash WTF1 ______ pcs. of Gambrel Flash WTF1 mod.

______ pcs. of Swept Wing Gable WEF1, etc ______ pcs. of Monoslope Flash WRH4

______ pcs. of #10x1” Waferhead Screw (Panel Screws) ______ pcs. of #14 x 1” MP Painted

______ pcs. of #10x1” Woodfast Screw (Accessories Screws)

______ pcs. of #12 x 3/4” Stitch Screw Painted

______ pcs. of Tube Caulk ______ rolls. of Butyl Sealant Tape

_____ pcs. of WSCB1 ______ pcs. of WSCT3

______ pcs. of Hem Bending Tool ______ pcs. of Touch-up Paint

______ pcs. of Vented Closure ______ pcs. of HORIZON S Outside Closure

______ pcs. of Pipe Flash ______ Roof Underlayment