Instructions / Assembly
FLAT SHEETS
1 FABRAL.COM
Fabral Flat Metal Sheets may be ordered for on-the-job fabrication. A wide variety of
substrates are available including aluminum, galvanized steel, Galvalume, copper and
stainless steel. Flat sheets may be coated with our premium Enduracote paint system
offered in a full range of colors.
Cupolas are an excellent way to bring architectural detail to any
structure. Fabral cupolas are built to order and are offered in a
variety of sizes (up to 66" x 66"), shapes and colors. Flashings
can be built to any roof pitch and optional windows may be built
into the side panels. Base sizes include 24" x 24", 36" x 36",
and 48" x 48".
Used to ll joints between building materials, Fabral Closed-Cell Backer Rod repels
moisture, provides a rm nish to the gap and is easily set into place with spray adhesive.
Closed-Cell Backer Rod is suited for use as a backing material for standing seam
applications. The round, exible, continuous lengths of extruded, polyethylene foam is
useful in minimizing “oil canning” with the 1 1/2" SSR panel.
BACKER ROD
CUPOLAS
RETROFIT SYSTEMS
Fabral metal-over-metal retrot roof applications offer a structurally sound, non-disruptive
and cost effective system for repair and renovating roofs. The system eliminates the need
to remove previous roong, saving up to 70% of labor. It requires only standard tools and
fasteners and has pre-punched pilot holes for rapid fastening. Available in 10' lengths, 16
gauge – 50 KSI steel, the system is laboratory and load tested.
Sealing small pipes is made easier with pipe boots
from Fabral. The metal base with a dome-shaped
boot serves as a covering for vent pipes. Specica-
tions include EPDM: up to 250° F; Silicon: up to
450° F
PIPE BOOTS
Pipe Size
Base Diameter Item No. min max
7 ¾" 3 ¼" 5"
10 ½" 5 4 ¼" 7 ½"
16 ½" 8 7" 13"
25 FABRAL.COM