User Manual

volume level rather than a time period.

Hold

Once the key is released (or the input level drops below the threshold), the value will remain at the

sustain level for a time set by the hold parameter.

Release

After the hold time the sound resumes its decay, this time at a new rate determined by the Release

setting.

Attack, Decay and Release Slope

The attack, decay, and release curves each have a slope dot in the middle that you can drag up

and down to vary the curve shape between linear, logarithmic and exponential behavior. This lets

you customize each of these curves to change its feel and snappiness and makes the EG much

more versatile.

Tips

When adjusting the EG control points, you can hold down the Shift key to fine-tune a setting, just

like with regular knobs

To let a sustain pedal control the EG, you can hook it up to the Hold setting. The recommended

way to do this is via a MIDI source

Next: Envelope follower