Installation Instructions + Use and Care Manual

Installation of wiring

box connection 1

Removethecoverfromthe

eldwiringcompartment.

DONOTturnonthepoweruntil

installationiscomplete!

ConnectthePowerSupply

Cabletotherangehood.

ConnecttheGreen(Greenand

Yellow)groundwireunderthe

Greengroundingscrew.Attach

theWhiteleadofthepower

supplytotheWhiteleadofthe

rangehoodwithatwist-ontype

wire connector.

AttachtheBlackleadofthe

powersupplytotheBlacklead

oftherangehoodwithatwist-

on type wire connector.

Replacetheeldwiringcompart-

mentcoverandthegreaselters.

ChecktheWiringDiagram.

A. Home power supply cable

B. Black wires

C. UL listed wire connectors

D. White wires

E. Green (or bare) ground wire from home power supply to be connected to green ground

screw

F. Range hood power supply cable

12 13

Opentheltercoverpanel.Theltercoverpanel

isheldbyamagnetcatch,pulldownwithenough

forcetoreleaseasshownabove.

Removethegreaseltersoneatatime,pushing

themtowardsthebackoftheunit,andatthesame

timepullingdownwardandsetaside.