Specification Sheet

WARNING! Product specications are subject to change without
notication. Consult the installation instructions before you begin
installing this range hood
# FILTER1 –
Charcoal Filter Kit
High quality charcoal lter for use
when recirculating the air back into
the kitchen. Filters out odor and
should be replaced every 6 months.
PERFORMANCE (600 CFM Motor shown)
SPECIFICATIONS
DIMENSIONS
2 Cabot Road Hudson, MA 01749 • TEL: [phone] • E-Mail: [e-mail] www.faberonline.com
SPEED 1 2 3 BOOST
CFM 150 350 450 560
sones 2.8 4.3 6.0 7.5
ACCESSORIES
min. / max. ceiling height 7' 8 1/2" - 9' 5 7/8"
convertible to ductless /
recirculating
yes – kit sold separately
canopy depth / height 19" 1/4" d | 9 1/2" h
high ceiling kit yes - reaches up to 11' 4 1/2" ceilings
controls 4 speed push button w/ blue LED
lighting 2 x 20 (W) halogen
ducting top 6" round
grease lters
dishwasher safe mesh and optional
stainless steel kit
10 minute intensive speed yes
AC input 120 V - 60 hz
AC power (600/300 cfm) max 370 W / 190W at | 2.1/1.6 A
SYNTHESIS
WALL RANGE HOOD
# MUDAMPER6 / MUDAMPER8 –
Universal Make-Up Air Damper
Satises make-up air requirements,
this kit uses an air switch to activate the
make-up air damper to open and bring
fresh air into the home when the hood
fan is on. It then closes tightly when the
hood is o. e CFM level is not reduced
with this accessory.
Rev:4/17
# HIGHSYNT –
High Ceiling Kit
One 39" upper chimney to replace
16 3/8" upper chimney that comes
with the hood.
# DUCTSYNT –
Ductless Conversion Kit
Includes: Lower chimney with
holes for ducting, ductless diverter
assembly, vent grates and charcoal
lter.
Imagined in Italy
# BAFFLE2 (30") / BAFFLE3 – (36")
Bae Filter Kit
Upgrade mesh grease lters to stainless
bae grease lters. BAFFLE2 for 30"
models, BAFFLE3 for 36" models.
30” or 35 3/8”
Ducted
Ductless