Installation instructions


27” MIN. - 39” MAX.
upper
chimney
cover
lower
chimney
cover
canopy
cabinet base
x = distance from hood to cooktop











FIGURE 4
DUCTED
DIMENSIONS
x
min & max ceiling height examples
x = 30"
min


max


x = 28"
min


max


x = 26"
min


max


x = 24"
min


max




FIGURE 4


     
(distance x in FIGURE 4)
     High
Ceiling Chimney Kit

FIGURE 4
DUCTED INSTALLATION DIMENSIONS
(vented to the outside)
PLAN THE INSTALLATION

Ductless Conversion Kit
WARNING!

WARNING
   
   
 
  
  

    
   
  

    

  
   


!
NOTE: To reduce the chimney structure
to the 27" minimum height as shown, the
middle section of the support structure
(FIGURE 5 ) needs to be removed. Out of
the box, the minimum chimney length is
32", not 27" as shown in the dimensional
diagram. Add 5" to all minimum ceiling
height calculations if keeping the middle
section in place. Contact Faber at
508-358-5353 for more information.
FIGURE 5