Specification Sheet

SPECIFICATIONS DIMENSIONS
ACCESSORIES
Rev :4/19
2 Cabot Road Hudson, MA 01749 • TEL: (508) 358-5353 • E-Mail: info@faberonline.com www.faberonline.com
Imagined in Italy
WARNING! Product specifications are subject to
change without notification. Consult the installation
instructions before you begin installing this range
hood. * Check local make up air codes for
guidelines.
PERFORMANCE
max rise height
14"
multiple ducting options
internal: left, right, down, forward, back
remote - forward or back
reversible motor box
yes
hood width | depth (36")
30"- 36" w | 2 1/8" d
controls
slide speed control dial with on/o button
ducting front/back
6" round (internal) or 10" round (remote)
grease filters
stainless mesh
no brand logo on stainless top strip
yes
Pro Motor (metal impellers) yes
auto shut o
yes
innovative saftey features
yes - Top strip stops if an object obstructs
its path
power cord included
yes
AC power
120 V - 60hz/Max 450 W at 3.8 A
SPEED 1 2 3
CFM 190 330 480
Sones 2.5
4 7
Overall
Motor on Front
Left Vent
Right Vent
Bottom Vent
Venting Options
# FILTERSCIR
Replacement Charcoal
Filter Kit
High quality charcoal filter for use
when recirculating the air back
into the kitchen. Filters out odor
and should be replaced every 6
months.
# MUDAMPER6 / MUDAMP-
ER8/MUDAMER10
Universal Make-Up Air
Damper
Satisfies make-up air requirements,
this kit uses an air switch to activate
the make-up air damper to open and
bring fresh air into the home when
the hood fan is on. It then closes
tightly when the hood is o. The
CFM level is not reduced with this
accessory. NOTE: MUDAMPER10 for
use with 900/1200 cfm motors.
# DUCTSCIR
Ductless Conversion Kit
Converts the Scirocco Plus to ductless.
The kit includes charcoal filters and a
kick plate return register to vent back
into the kitchen.
SCIROCCO PLUS DOWN DRAFT RANGE HOOD
# FLANGE10
10'' Plate for Remote
Blower
A 10'' plate for connecting the remote
blower to 10'' round ducting. This is
required for AXP250 & non-Faber
remote blowers.