Product Specifications

Rev. 12/12
WARNING! Product specifications are subject to change without notification. Consult the installation instructions for both the
remote blower and the ventilation system before you begin installing this range hood. Consult cooking manufacturer instructions
for cut out dimensions, clearances and CFM requirements.
Top trim widths:
30 " (762 mm) vent
36 " (914 mm) vent
14 " (357 mm)
retractable
vent height
27" (686 mm) for 30" (762 mm) vent
33" (838 mm) for 36" (914 mm) vent
13" (330 mm)
10 "
(254 mm)
21⁄8 " (54 mm)
283⁄4"
(730 mm)
3⁄8" (9.5 mm)
11⁄2 " (38 mm)
13" (330 mm)
Terminal box cover
6" (152 mm)
diameter
vent collar
x
Note: Overall dimensions show unit with
internal blower box attached. Remote
Blower would only have a vent collar
attached instead of the 13” x 13” box shown.
X = Distance to the rear of the cabinet
or wall. Must be a minimum of ½”.
When mounted on the front of the hood, the Internal
blower box can be rotated to vent left, right, down or
thru the hood to the rear of the unit. When mounted
on the back of the hood, the blower can be vented
left, right or down. The remote blower venting can
come out the front or back of the unit venting down.
FRONT
BACK
Motor on Front
Motor on Back
Right Vent
Left Vent
Bottom Vent
Direct Rear Vent
Dimensional Diagrams
(see installation instructions for more information)