Specifications

WARNING! Product specifications are subject to change without notification. Consult the installation instructions before you begin installing this range hood.
Dimensional Diagrams
(see installation instructions for more information)
MUDAMPER6 = 6”
MUDAMPER10 = 10”
MUDAMPER6 = 6”
MUDAMPER10 = 10”
AIR FLOW SWITCH ASSEMBLY
(Located inside Range Hood Ducting)
AUTOMATIC MAKEUP AIR DAMPER
(Located inside Fresh Air Ducting)
Note: The fresh air damper is installed into a completely separate duct independent of the range hood ducting. The ductwork and make-
up air damper are linked into your return air side of the central HVAC system OR a separate duct coming from the outside directly into
the kitchen. The air flow switch and damper are linked thru low voltage wiring. The plug-in 24 volt transformer is required when installing
the fresh air duct and damper directly thru the kitchen wall. Connecting to the Central HVAC system does not require the transformer. A
qualified HVAC professional should inspect your home to determine the best installation.
MUDAMPER8 = 8”
MUDAMPER8 = 8”
FEATURES & ADVANTAGES
• Meets IRC (international residential code) M1503.4
• 24 Vac, 60 hz ac motor on damper
• Fresh air damper opens automatically when hood is operating, closes shut when fan is turned off
• Switch assembly attaches directly above the hood inside ducting
• Can be installed in all ducting configurations (vertical, horizontal, down or after elbows)
• Switch assembly fits inside all faber chimneys, compatible with all models over 300 cfm
• Simple installation: no drilling, calibrations or measuring required
• Designed and engineered to witstand heavy cooking contaminants (grease, steam, smoke and steam)
• Can be combined with most other hvac components and is a universal makeup air solution
• Reliable mechanical air switch prevents service issues and false tripping of system
p.o. box 435 • Wayland, MA 01778 • tel: [phone] • fax: [phone] • e-mail: [e-mail] • www.faberonline.com
Rev. 08/14