Installation Guide

Version11/10-Page6
INSTALLATION
COMBINATIONS HOOD AND MOTOR KITS
CHOOSE A BLOWER FOR YOUR HOOD
After choosing the hood width and depth for your cooking
needs, next choose the type of blower appropriate for
your cooking.
NOTE: no other blower is
compatible with this hood, except for the
kits below.
# IB600 - Internal Blower Kit 600 cfm
# IB1200 - Internal Blower Kit 1200 cfm
# RB900 - Remote Blower Kit 900 cfm
# RB1200 - Remote Blower Kit 1200 cfm
OPTIONAL ACCESSORIES AVAILABLE
• *Charcoal Filter
*itishighlyrecommendedthatprofessionalstylecookingalwaysbe
ventedtotheoutside;forrecirculatinginstallationsonly,someductworkis
requiredtoexhausttheunitoutofthecabinet.Replaceasneededwiththe
same model
part # 6093034
• CFM Reducer part # CFMRED - Reducescfmtobelow300cfmby
converting6inchroundductto5inchround.
NOTE: The charcoal lter kit and CFM reducer kit are for
use with the 600 cfm internal blower kit only
CAUTION: To reduce risk of re and electric shock, install this rangehood only with
internal or remote blowers recommended and manufactured as shown in these
instructions by Faber.