Instruction Manual
23
CARING FOR FILTERS
Open the Panel by pulling it down.
Remove the lter, pushing the lever
towards the back of the unit while
pulling downward.
Wash the lter without bending it.
Leave it to dry thoroughly before
replacing. If the surface of the lter
changes color over time, efciency
will not be affected.
To replace the lter, push the lter up
into position while holding the lever
back, then release lever to lock in
place.
1
2
3
CLEANING METAL GREASE FILTERS
The metal grease lters can be cleaned in hot detergent solution or washed
in the dishwasher.
They should be cleaned every 2 months use, or more frequently if use is
particularly heavy.
NOTES:
• Cleaning in a dishwasher may dull the nish of the metal grease lters.
• Ensure that the lters are completely dry before installing them back into
the Range Hood.
CLEANING EXTERIOR SURFACES
Please note, abrasives and scouring agents can scratch range hood nishes
and should not be used to clean nished surfaces.
Stainless Steel nish cleaning instructions:
Clean exterior surfaces with a commercially available stainless steel cleaner.