Installation Guide

ManualsBrandsFaber ManualsCooking AppliancesInca In-Light Insert Range Hood with 600 CFM Blower, Inca In-Light Insert, Perimetric Filtration, ADA Compliant (Remote Included), Variable Air Management, Flush Mount in Stainless Steel: 35" Width

27

REPLACING BULBS

LED lights must be replaced by Faber factory authorized

service.

1) Angle the top of the lter up

and into the area below the

motor and then insert the

lower portion of the lter.

2) Turn the lter to the right

around the motor and slide

the lter between the motor

and side wall.

3)Position the lter on the side

of the blower and turn to

lock in place.

4)Repeat on the left side.

CHANGING AND INSERTING THE CHARCOAL

FILTER