Specification Sheet

Direct Rear Venting

Vent the ducting up or rotate the

blower to the back (as shown above)

to avoid extra duct work when on an

outside wall

Backlit Electronic Controls

Backlit electronic controls with a

White LED light to indicate the

current speed and LED lighting. Now

you can adjust CFM's at installation

from the control buttons.

Remote Control (optional)

Control all features of the hood

from the convenience of a ADA

compliant wireless remote control

(sold separately)

Easy Snap Mounting Clips

Installation with easy built-in

adjustable clips that tighten onto the

sides of the cabinet ﬂoor

INCA HC

INSERT RANGE HOOD

AN UPDATED VERSION OF THE CLASSIC FABER INSERT HOOD. The updated

Inca HC by Faber now with VAM Technology; features new advanced electronic controls, an optional

remote control and LED lights. The new Inca HC has stainless covered mesh dishwasher safe grease

ﬁlters and has the ability to vent up or to the back to minimize duct work and maximize power.

KEY FEATURES

Now with

Variable Air Management

adjust CFM for

your local codes

Model # Size / Color Set your CFM Level Sound Levels (sones)

INHC29SSV 29 Stainless 600, 395, 295 CFM 2.8 - 7.5 sones

INHC35SSV 35 Stainless 600, 395, 295 CFM 2.8 - 7.5 sones

AVAILABLE MODELS

Note: set to 600 CFM motor class out of the box

PAGE 1
INCA HC INSERT RANGE HOOD AN UPDATED VERSION OF THE CLASSIC FABER INSERT HOOD. The updated Inca HC by Faber now with VAM Technology; features new advanced electronic controls, an optional remote control and LED lights. The new Inca HC has stainless covered mesh dishwasher safe grease filters and has the ability to vent up or to the back to minimize duct work and maximize power.
PAGE 2
INCA HC INSERT RANGE HOOD SPECIFICATIONS DIMENSIONS cut out dimensions 29" 27 5/8" w x 13 9/16" d cut out dimensions 35" 33 3/4" w x 13 9/16" d convertible to ductless / recirculating yes – FILTER1 or FILTER1LL body width | depth 28 3/8" OR 34 5/16" w X 13 3/4" d height inside cabinet 12 15/16" high Variable Air Management Yes (set to 295, 395, 600 CFM) controls 4 speed electronic w/ white LED lighting 2 X 5 W LED ducting top/rear (Vari-Duct) 6" round buillt In mounting yes - Easy Sna
PAGE 3
INCA HC INSERT RANGE HOOD LINER SPECIFICATIONS Liners are stainless steel kits that are optional for cabinet insert hoods. They create a metal 4” tall perimeter to “line” the wood below the range hood with metal. They create a more finished look and move the range hood up 4” creating additional capture area. In some cases, a liner may be required by local code if the cabinet starts at below 30” off the stove (check local building codes). All liners are adjustable in depth with a telescoping frame.