Installation Instructions

18
Cleaningmetalgreaselters
Theltersmustbecleanedevery2monthsofoperation,
or more frequently for particularly heavy usage, and can
be washed in a dishwasher.
• Removetheltersoneatatimebysupportingthemwith
one hand and turning the safety knobs (pull and turn).
• Wash the Filters without bending them, and leave them
to dry completely before replacing. (If the surface of
thelterchangescolorastimegoesby,thiswillhave
absolutelynoeffectontheefciencyofthelteritself.)
• Retthemandxthemusingthesafetyknobspro-vided
(pull and turn).
• Nowatercanbepresentinltersbeforeinstallingback
in hood.
Replacing Activated Charcoal Filter
The lter is not washable and cannot be regenerated,
and must be replaced approximately every 4 months of
operation, or more frequently for particularly heavy usage.
• Remove the Filters one at a time, pushing them to-
wards the back of the unit and at the same time pulling
downward.
• Removethesaturatedcharcoallterbyreleasingthe
xinghooks.
• Fitthenewlterandfastenitinitscorrectposition.
• Replace, taking care to ensure that the handle faces
forwards.
Caution:"Whenusedinrecirculationmode,to
ReducetheRiskofFireandShockuseonlyconver-
sionkitModelFILTER2".
Gu10self-ballastedledlamps
–listedinaccordancewithul
1993/nmx-j-578/1-ance/csa
c22.2No.1993
Lighting unit
• Remove the snap-on lamp cover by levering it from
under the metal ring, supporting it with one hand.
• Replace the lamp with a new one of the same type,
making sure that you insert the two pins properly into
the housings on the lamp holder.
• Replace the snap-on lamp cover.