Data Sheet

ManualsBrandsFABER KABEL ManualsIndustrial Data CablesPhone cord J-2Y(St)Y … St III Bd 4 x 2 x 0.28 mm² Grey Sold per metre

ISDN cable

J-2Y(St)Y ... St III Bd

Application: For connection of computer units, ISDN-sub-units and -devices and for data transmission. Suitable for transmis-

sion of analogue and digital signals up to 16 Mbit/s. For installation in dry and wet rooms, on and under plaster.

Construction and technical data:

Conductor material: copper, bare

Conductor construction: Class 1 = solid

Insulation: polyethylene

Stranding unit: Four strand

Stranding: Bundle

Screen over strand: Foil

Drain wire: yes

Sheathing material: PVC

Colour of outer sheath: grey RAL 7032

Flame-retardant: VDE 0482-332-1-2/IEC 60332-1-2

Permitted outer cable temperature, xed, °C: -30 - +70 °C

Permitted outer cable temperature, moved, °C: -5 - +50 °C

Bending radius, xed installation: 7.5 x Ø

Impedance: 100 Ohm

Insulation resistance: 5000 MOhmxkm

Coupling K1: 400 pF

Coupling K9-12: 100 pF

The products and information presented here are for technical calculation only. They are subject to technical progress and in no way represent the ability of

shipment. Outer diameters are approximately.

Summary of content (2 pages)

PAGE 1
ISDN cable J-2Y(St)Y ... St III Bd Application: For connection of computer units, ISDN-sub-units and -devices and for data transmission. Suitable for transmission of analogue and digital signals up to 16 Mbit/s. For installation in dry and wet rooms, on and under plaster.
PAGE 2
Stranding 4 cores twisted into star-quads, 5 star-quads stranded into one sub-unit, sub-units layed up in layers Core identification The star-quads of each bunch are continuous: red, green, grey, yellow, white The cores within one star-quad are marked by rings: a-wire 1 without ring b-wire 1 one ring, wide space a-wire 2 double ring, wide space b-wire 2 double ring, narrow spaced J-2Y(St)Y ... St III Bd Maximum operating capacity: 52 nF/km peak operating voltage, V: 300 V part no.