Data Sheet

© 2022 · Klaus Faber AG · all rights reserved KLAUS FABER AG · Europaallee 33 · 66113 Saarbrücken · Germany · T [phone] - 0 dbl_jeysty.pdf / Issue 02/17/2022 / page 1/2
Cable for industrial electronics
JE-Y(St)Y
Application: For signal transmission between electronic devices, in computer systems, process control units o󰀩ce equipment.
For installation in dry and wet rooms.
Construction and technical data:
CPR-classication according to EN 50575: Eca
Standard: VDE 0815
Conductor material: copper, bare
Conductor construction: solid
Insulation: PVC YI3
Core wrapping: plastic foil
Screen: plastic coated aluminium foil + solid copper drain wire
Sheathing material: PVC YM1
Colour of outer sheath: grey RAL 7032, alternatively blue RAL 5015
Flame-retardant: VDE 0482-332-1-2/IEC 60332-1-2
Permitted outer cable temperature, xed, °C: -30 - +70 °C
Bending radius, xed installation: 7.5 x Ø
Specic inductivity: 0.7 mH/km
Coupling K1: 200 pF
The products and information presented here are for technical calculation only. They are subject to technical progress and in no way represent the ability of
shipment. Outer diameters are approximately.
Stranding: - cores twisted into pairs
- 4 pairs layed up into sub-units (2-pairs cable stranded as one star-quad)
- sub-units layed up in layers
Core identication: The basic colour of each bunch are continuous sequence: blue, red, grey, yellow, green, brown, white, black.
The bundles are identied by the colour of the rings on the insulating core.