Data Sheet

dbl_bmk.pdfIssue23.11.2018 · Klaus Faber AG · Lebacher Straße 152 – 156 · 66113 Saarbrücken · Germany · Phone [phone] · Fax -289
Fire signalisation cable
J-Y(St)Y ... Lg (BMK)
CPR-performance: Eca
Conductor material: copper, bare
Conductor class: class 1 = solid
Insulation: PVC TI1
Stranding unit: pair
Stranding: layers
Screen over strand: foil
Drain wire: yes
Sheathing material: PVC YM1
Colour outer sheath: red
Flame-retardant: VDE 0482-332-1-2/IEC 60332-1-2
Permitted outer cable
temperature, fixed:
-30 - +70 °C
Permitted outer cable
temperature, in motion/
during installation:
-5 - +50 °C
Bending radius, fixed
installation:
7,5 x DA
Bending radius, single bend: 2,5 x DA
Insulation resistance: 100 MOhmxkm
Maximum operating capacity: 100 nF/km
peak operating voltage: 300 V
Core identification: colours acc. to VDE 0815
Application: For the connection of telecommunication units inside buildings in and under plaster in dry and wet
rooms. Also suitable for installation outdoors if the cable is protected from sunlight. By the special sheath imprint -
Brandmeldekabel- this cable is particularly designed for the use in fire signalisation systems.
Additional information: Stranding: cores twisted into pairs (2-pairs cable stranded as star-quad), pairs stranded in
layers. Core identification: two-pair cable: red, black, white, yellow. More than two-pairs are in continuous sequence:
white-blue, white-yellow, white-green, white-brown, white-black. In the 1-st pair of each layer there is one red core in
place of the white one.
The products and information presented here are for technical calculation only. They are subject to technical progress and in no way represent the
ability of shipment. Outer diameters are approximately.
Table: Technical characteristics Fire signalisation cable
p/n part name D
A.
[mm]
G
.
[kg/km]
Cu
.
[kg/km]
100947 01X2X0,8 RT 5,5 38 11
100056 Brandmeldekabel 02X2X0,8
RT
7 55 21
p/n part name D
A.
[mm]
G
.
[kg/km]
Cu
.
[kg/km]
100057 Brandmeldekabel 04X2X0,8
RT
9 95 41