Data Sheet

ManualsBrandsFABER KABEL ManualsIndustrial Data CablesFire alarm cable J-Y(ST)Y 10 x 2 x 0.8 mm Red Sold per metre

Fire signalisation cable

J-Y(St)Y ... Lg (BMK)

Application: For the connection of telecommunication units inside buildings in and under plaster in dry and wet rooms. Also sui-

table for installation outdoors if the cable is protected from sunlight. By the special sheath imprint -Brandmeldekabel- this cable

is particularly designed for the use in re signalisation systems.

Stranding: cores twisted into pairs (2-pairs cable stranded as star-quad), pairs stranded in layers. Core identication: two-pair

cable: red, black, white, yellow. More than two-pairs are in continuous sequence: white-blue, white-yellow, white-green, whi-

te-brown, white-black. In the 1-st pair of each layer there is one red core in place of the white one.

Construction and technical data:

CPR-classication according to EN 50575: Eca

Conductor material: copper, bare

Conductor construction: Class 1 = solid

Insulation: PVC TI1

Stranding unit: pair

Stranding: Layers

Screen over strand: Foil

Drain wire: yes

Sheathing material: PVC YM1

Colour of outer sheath: red

Flame-retardant: VDE 0482-332-1-2/IEC 60332-1-2

Permitted outer cable temperature, xed, °C: -30 - +70 °C

Permitted outer cable temperature, moved, °C: -5 - +50 °C

Bending radius, xed installation: 7.5 x Ø

Bending radius, single bend: 2.5 x Ø

Insulation resistance: 100 MOhmxkm

The products and information presented here are for technical calculation only. They are subject to technical progress and in no way represent the ability of

shipment. Outer diameters are approximately.

Summary of content (2 pages)

PAGE 1
Fire signalisation cable J-Y(St)Y ... Lg (BMK) Application: For the connection of telecommunication units inside buildings in and under plaster in dry and wet rooms. Also suitable for installation outdoors if the cable is protected from sunlight. By the special sheath imprint -Brandmeldekabel- this cable is particularly designed for the use in fire signalisation systems. Stranding: cores twisted into pairs (2-pairs cable stranded as star-quad), pairs stranded in layers.
PAGE 2
Fire signalisation cable Maximum operating capacity: 100 nF/km Core identification: colours acc. to VDE 0815 peak operating voltage, V: 300 V part no. part name Dl [mm] Ø [mm] Cu G [kg] 100947 01X2X0.8 0.8 5.5 11 38 100056 02X2X0.8 0.8 7 21 55 100057 04X2X0.8 0.8 9 41 95 100948 05X2X0.8 0.8 9.4 52 114 100058 06X2X0.8 0.8 10.5 62 130 100059 10X2X0.8 0.8 13 102 205 100060 20X2X0.8 0.8 16.5 204 380 100145 30X2X0.8 0.8 20 304 570 100146 40X2X0.8 0.