Data Sheet

© 2022 · Klaus Faber AG · all rights reserved KLAUS FABER AG · Europaallee 33 · 66113 Saarbrücken · Germany · T +49 681 9711 - 0 dbl_h05v-k.pdf / Issue 02/17/2022 / page 1/3
PVC insulated wire
H05V-K
Application: For internal wiring of switching boxes and other electrical appliances. For installation in closed conduits and pipes.
Not for direct installation under plaster.
Construction and technical data:
CPR-classication according to EN 50575: Eca
Standard: EN 50525-2-31
Conductor material: copper, bare
Conductor construction: Class 5 = exible
Insulation: PVC TI1
Flame-retardant: VDE 0482-332-1-2/IEC 60332-1-2
Max. temperature at conductor, °C: 70 °C
Permitted outer cable temperature, xed, °C: 70 °C
Permitted outer cable temperature, moved, °C: 5 - 70 °C
Bending radius, xed installation: 4 x Ø
The products and information presented here are for technical calculation only. They are subject to technical progress and in no way represent the ability of
shipment. Outer diameters are approximately.
H05V-K
Conductor construction: Class 5 = exible
Nominal voltage Uo: 300 V
Nominal voltage U: 500 V
Maximum operating capacity: 65 nF/km
Test voltage: 2 kV
part
no.
part name Dl
[mm]
Rl
[Ohm/km]
Wi
[mm]
Ibl
[A]
Rbv
[mm]
Ø
[mm]
Cu G
[kg]
040221 1X0.5 BK 0.9 39 0.6 6 8.8 2.2 4,8 10
040985 1X0.5 BK barrel pack 0.9 39 0.6 6 8.8 2.2 4,8 10
040253 1X0.5 WH 0.9 39 0.6 6 8.8 2.2 4,8 10
040240 1X0.5 VI 0.9 39 0.6 6 8.8 2.2 4,8 10
041068 1X0.5 VI barrel pack 0.9 39 0.6 6 8.8 2.2 4,8 10

Summary of content (3 pages)