Data Sheet

dbl_efk_310_cy_uc.pdfIssue23.11.2018 · Klaus Faber AG · Lebacher Straße 152 – 156 · 66113 Saarbrücken · Germany · Phone [phone] · Fax -289
Drag chain cable FABER® EFK 310 CY
Specification/Standard: UL/CSA
Conductor material: copper, bare
Conductor class: class 6 = extra finely stranded
Insulation: PVC
Material inner sheath: PVC
Screen: copper braid, tinned
Screen coverage: 85 %
Sheathing material: PVC
Colour outer sheath: grey RAL 7001
Flame-retardant: VDE 0482-332-1-2/IEC 60332-1-2
Oil-resistant: EN 60811-404
Permitted outer cable
temperature, fixed:
-40 - +70 °C
Permitted outer cable
temperature, in motion/
during installation:
-5 - +70 °C
Bending radius, fixed
installation:
4 x DA
Bending radius, moving
application:
10 x DA
Bending cycles, max.: 3 Mio.
Moving distance, max.: 10 m
Insulation resistance: 20 MOhmxkm
Nominal voltage Uo: 300 V
Nominal voltage U: 500 V
Core identification: green-yellow + numbers
Application: Highly flexible data cable for use in moving applications under extreme conditions with specific EMC
(electromagnetic compatibility) requirements. It is applicable in standard drag chains without tensile load. The cable
is flame-retardant, and largely resistant to most chemicals used in industrial environment. Please pay attention to our
instructions for the use of drag chain cables on our website.
The products and information presented here are for technical calculation only. They are subject to technical progress and in no way represent the
ability of shipment. Outer diameters are approximately.
Table: Technical characteristics FABER® EFK 310 CY (Drag chain cable)
p/n part name D
A.
[mm]
G
.
[kg/km]
Cu
.
[kg/km]
035471 FABER® EFK 310 CY 2X0,5
cUL GR
7,7 98 32
035472 FABER® EFK 310 CY 3G0,5
cUL GR
8 107 38
p/n part name D
A.
[mm]
G
.
[kg/km]
Cu
.
[kg/km]
035473 FABER® EFK 310 CY 4G0,5
cUL GR
9 131 45,4
035474 FABER® EFK 310 CY 5G0,5
cUL GR
9,8 153 53