Datasheet

dbl_efk_310_cy_uc.pdfIssue24.03.2017 · Klaus Faber AG · Lebacher Straße 152 – 156 · 66113 Saarbrücken · Germany · Phone [phone] · Fax -289
Drag chain cable FACAB EFK 310 CY
specification/standard: UL/CSA
conductor material: bare copper
conductor construction: fine stranded class 6
insulation: PVC
inner sheath: PVC
screen: Cu-braid, tinned
screen coverage: 85 %
sheathing material: PVC
colour of outer sheath: gray RAL 7001
flame retardant: VDE 0482-332-1-2/IEC 60332-1-2
oil resistant: EN 60811-2-1
max. operating temperature,
fixed:
-40 - +70 °C
temperature, moved/during
installation:
-5 - +70 °C
bending radius, fixed
installation:
4 x DA
bending radius, moved
application:
10 x DA
bending cycles, max.: 3 Mio.
moving distance, max.: 10 m
insulation resistance: 20 MOhmxkm
nominal voltage Uo: 500 V
nominal voltage U: 300 V
core identification: gn-ye + numbers
Application: Highly-flexible data cable for continuous moved use under extreme conditions with particular
requirements on EMC. It is applicable in standard drag chains without tensile load. The cable is flame retardant, and
largely resistant against most chemicals used in industrial environment. Please pay attention to our instructions for the
use of drag-chain cables.
The products and information presented here are for technical calculation only. They are subject to technical progress and in no way represent the
ability of shipment. Outer diameters are approximately.
Table: Technical characteristics FACAB EFK 310 CY
p/n part name D
A.
[mm]
G
.
[kg/km]
Cu
.
[kg/km]
035471 FACAB EFK 310 CY 2X0,5
cUL GR
7,7 98 32
035472 FACAB EFK 310 CY 3G0,5
cUL GR
8 107 38
p/n part name D
A.
[mm]
G
.
[kg/km]
Cu
.
[kg/km]
035473 FACAB EFK 310 CY 4G0,5
cUL GR
9 131 45,4
035474 FACAB EFK 310 CY 5G0,5
cUL GR
9,8 153 53