Data Sheet

dbl_efk_sc_12yc11y.pdfIssue23.11.2018 · Klaus Faber AG · Lebacher Straße 152 – 156 · 66113 Saarbrücken · Germany · Phone +49 681 9711-0 · Fax -289
Drag chain cable FABER®
EFK SC 12YC11Y
Specification/Standard: UL/CSA
Conductor material: copper, bare
Conductor class: class 6 = extra finely stranded
Insulation: TPE
Screen: copper braid, tinned
Screen coverage: 85 %
Sheathing material: polyurethan
Colour outer sheath: orange RAL 2003 (DESINA)
Flame-retardant: VDE 0482-332-1-2/IEC 60332-1-2
Halogen-free: DIN EN 50267/IEC 60754
UV-resistant: yes
Oil-resistant: EN 60811-404
Permitted outer cable
temperature, fixed:
-50 - +80 °C
Permitted outer cable
temperature, in motion/
during installation:
-40 - +80 °C
Bending radius, fixed
installation:
4 x DA
Bending radius, moving
application:
7,5 x DA
Bending cycles, max.: 5 Mio.
Moving distance, max.: 100 m
Nominal voltage Uo: 600 V
Nominal voltage U: 1 kV
Test voltage: 4 kV
Application: Highly flexible data cable for constant movement under extreme conditions with specific EMC
(electromagnetic compatibility) requirements. It is applicable in standard drag chains without tensile load. The cable
is flame-retardant, and largely resistant to many chemicals used in industrial environment. Please pay attention to our
instructions for the use of drag chain cables on our website.
The products and information presented here are for technical calculation only. They are subject to technical progress and in no way represent the
ability of shipment. Outer diameters are approximately.
Table: Technical characteristics FABER® EFK Single core 12YC11Y (Drag chain cable)
p/n part name D
A.
[mm]
G
.
[kg/km]
Cu
.
[kg/km]
035337 FABER® EFK-SC12YC11Y-O
1X6 0,6/1 kV cUL SW/OR
7,6 123 79
035338 FABER® EFK-SC12YC11Y-O
1X10 0,6/1 kV cUL SW/OR
8,5 177 127,6
p/n part name D
A.
[mm]
G
.
[kg/km]
Cu
.
[kg/km]
035339 FABER® EFK-SC12YC11Y-O
1X16 0,6/1 kV cUL SW/OR
9,9 241 186,2
035340 FABER® EFK-SC12YC11Y-O
1X25 0,6/1 kV cUL SW/OR
11,4 354 258

Summary of content (2 pages)