Data Sheet

dbl_efk_feedback_cp_s.pdfIssue23.11.2018 · Klaus Faber AG · Lebacher Straße 152 – 156 · 66113 Saarbrücken · Germany · Phone [phone] · Fax -289
Drag chain cable FABER®
EFK Feedback-CP acc. to
Siemens Standard 6FX8008+
Specification/Standard: UL/CSA
Conductor material: copper, bare
Conductor class: class 6 = extra finely stranded
Insulation: polypropylene
Screen: copper braid, tinned
Screen coverage: 85 %
Sheathing material: polyurethan
Colour outer sheath: green RAL 6018 (DESINA)
Flame-retardant: VDE 0482-332-1-2/IEC 60332-1-2
Halogen-free: DIN EN 50267/IEC 60754
UV-resistant: yes
Oil-resistant: EN 60811-404
Permitted outer cable
temperature, fixed:
-50 - +80 °C
Permitted outer cable
temperature, in motion/
during installation:
-40 - +80 °C
Bending radius, fixed
installation:
5 x DA
Bending radius, moving
application:
7,5 x DA
Bending cycles, max.: 5 Mio.
Moving distance, max.: 100 m
peak operating voltage: 300 V
Core identification: acc. to Siemens-specification
Application: Connection cable between encoder/resolver and servo controller. For application in machine tools and
drag chains with medium mechanical stress. Please pay attention to our instructions for the use of drag chain cables
on our website.
Additional information: Siemens part numbers (6FX...) are registered trade marks of Siemens AG and used only as
reference.
The products and information presented here are for technical calculation only. They are subject to technical progress and in no way represent the
ability of shipment. Outer diameters are approximately.
Table: Technical characteristics FABER® EFK Feedback-CP Siemens (Drag chain cable)
p/n part name D
A.
[mm]
Cu
.
[kg/km]
G
.
[kg/km]
035306 [8X2X0,18] GN cUL -
6FX8008-1BD11
7,8 54 88