Data Sheet

dbl_efk_300_cp.pdfIssue23.11.2018 · Klaus Faber AG · Lebacher Straße 152 – 156 · 66113 Saarbrücken · Germany · Phone [phone] · Fax -289
Drag chain cable FABER® EFK 300 CP
Conductor material: copper, bare
Conductor class: class 6 = extra finely stranded
Insulation: TPE/PP
Material inner sheath: polyurethan
Screen: copper braid, tinned
Screen coverage: 85 %
Sheathing material: polyurethan
Colour outer sheath: grey RAL 7001
Flame-retardant: VDE 0482-332-1-2/IEC 60332-1-2
Halogen-free: DIN EN 50267/IEC 60754
UV-resistant: yes
Oil-resistant: EN 60811-404
Permitted outer cable
temperature, fixed:
-50 - +80 °C
Permitted outer cable
temperature, in motion/
during installation:
-40 - +80 °C
Bending radius, fixed
installation:
4 x DA
Bending radius, moving
application:
7,5 x DA
Bending cycles, max.: 5 Mio.
Moving distance, max.: 100 m
Nominal voltage Uo: 300 V
Nominal voltage U: 500 V
Test voltage: 3 kV
Core identification: green-yellow + numbers
Application: Highly flexible control cable for the constantly moving equipment under extreme conditions for indoor
and outdoor use combined with specific EMC (electromagnetic compatibility) requirements. The cable is halogen-
free, flame-retardant and resistant to most chemicals occurirng in industry environment. Please pay attention to our
instructions for the use of drag chain cables on our website.
The products and information presented here are for technical calculation only. They are subject to technical progress and in no way represent the
ability of shipment. Outer diameters are approximately.
Table: Technical characteristics FABER® EFK 300 CP (Drag chain cable)
p/n part name D
A.
[mm]
G
.
[kg/km]
Cu
.
[kg/km]
031442 FABER® EFK 300 CP 02X0,5
GR
7,1 61 48
p/n part name D
A.
[mm]
G
.
[kg/km]
Cu
.
[kg/km]
030954 FABER® EFK 300 CP 03G0,5
GR
7,4 104 53