Data Sheet

ManualsBrandsFABER KABEL ManualsIndustrial Data CablesSheathed cable NHXMH-J 3 G 1.5 mm² Grey Sold per metre

LSOH building wire

NHXMH-J/-O

Application: Low-smoke, zero-halogen, ame-retardant building wire, for installation on and under plaster in dry and wet

rooms, as well as in concrete (except for shaken, jolted, tamped concrete). For indoor use only, primarily in buildings with a high

concentration of people and material assets.

Construction and technical data:

CPR-classication according to EN 50575: Dca

Standard: VDE 0250 T. 214

Conductor material: copper, bare

Conductor construction: class 1, up from 16 sqmm class 2

Insulation: XLPE 2XI1

Sheathing material: FRNC-compound HM2

Flame-retardant: VDE 0482-266-2-4/IEC 60332-3-24 (Cat. C)

Smoke density: DIN EN 61034/IEC 61034

Halogen-free: DIN EN 50267/IEC 60754

Max. temperature at conductor, °C: 70 °C

Permitted outer cable temperature, xed, °C: -40 - +70 °C

Permitted outer cable temperature, moved, °C: 5 - 70 °C

The products and information presented here are for technical calculation only. They are subject to technical progress and in no way represent the ability of

shipment. Outer diameters are approximately.

NHXMH-J

Nominal voltage Uo: 300 V

Nominal voltage U: 500 V

Test voltage: 2 kV

Protective conductor: yes

Core identication: colours acc. to VDE 0293 (HD308)

part

no.

part name Rl

[Ohm/km]

Ibl

[A]

Rbv

[mm]

Cu G

[kg]

020278 01X1.5 RE 12.1 20.8 5.2 15 75

020279 01X2.5 RE 7.41 22.4 5.6 24 85

Summary of content (3 pages)

PAGE 1
LSOH building wire NHXMH-J/-O Application: Low-smoke, zero-halogen, flame-retardant building wire, for installation on and under plaster in dry and wet rooms, as well as in concrete (except for shaken, jolted, tamped concrete). For indoor use only, primarily in buildings with a high concentration of people and material assets. Construction and technical data: CPR-classification according to EN 50575: Dca Standard: VDE 0250 T.
PAGE 2
part no. part name 020232 01X4 Rl [Ohm/km] RE Ibl [A] 4.61 Rbv [mm] Ø [mm] Cu G [kg] 28 7 39 135 020280 01X6 RE 3.08 29.6 7.4 58 150 020281 01X10 RE 1.83 31.2 7.8 96 200 020233 01X16 RM 1.15 38.4 9.6 154 295 020282 01X25 RM 0.727 48 12 240 350 020185 03X1.5 RE 12.1 19.5 34.4 8.6 43 130 020188 03X2.5 RE 7.41 27 38 9.5 72 165 020206 03X4 RE 4.61 36 42 10.7 115 235 020207 03X6 RE 3.08 46 49.2 12.3 173 320 020208 03X10 RE 1.
PAGE 3
Rl Conductor resistance Ibl Ampacity in air (30 °C) Rbv Bending radius, fixed installation Ø outer diameter approx. Cu Copper weight (GER) G net weight per 1000 © 2022 · Klaus Faber AG · all rights reserved KLAUS FABER AG · Europaallee 33 · 66113 Saarbrücken · Germany · T +49 681 9711 - 0 dbl_nhxmh.