Assembly Instructions

The FabEnCo A Series Self-Closing Safety Gate can be easily installed in minutes on all types of handrails
(angle, atbar, pipe) or to existing walls. It can be mounted left or right, on either side of a handrail. The
Safety Gate’s stainless steel spring automatically closes the gate after each passage and adjustment bolts
provide positive stop without handrail contact.
Hardware
Parts Quantity
A. U-Bolt* ........................................................ 1
B. J-Bolt* ......................................................... 1
C. 1/2” Zinc-Plated Bolts ................................ 2
D. 1/2” Zinc-Plated Heavy Hex Nuts .............. 4
E. 3/8” Zinc-Plated Heavy Hex Nuts .............. 2
F. 3/8” Zinc-Plated Washers .......................... 2
G. Channels ..................................................... 2
H. Mounting Plate/Frame Assembly ............... 1
(with 2 adjustable stop bolts)
*Use U-Bolt for installation on pipes and J-Bolt for installation on angles.
Suggested Tools: Adjustable Wrench and Socket Set
with 7/8” and 11/16” Sockets
C.
G.
Installation
Step 1: Insert the U-Bolt (or J-Bolt) through the slot in the Mounting Plate/Frame Assembly. Fasten to the handrail
with the 3/8” Washers and 3/8” Nuts.
Step 2: Insert the 1/2” Bolts through the set of holes (at the desired level) on one Channel, then through the
Mounting Plate/Frame Assembly. Fasten the 1/2” Nuts onto the 1/2” Bolts and tighten ush against the
Mounting Plate/Frame Assembly to stabilize.
Step 3: Place the second Channel on the other side of the handrail and tighten with the remaining 1/2” Nuts.
For additional information or assistance, call 1-800-962-6111 or e-mail us at [e-mail]
For Mounting Tips in other languages, please visit our website at www.safetygate.com/product-literature
A Series: Mounting Tips
5
E.
F.
H.
G.
D.
A.
B.
D.