Safety data sheet
Safety Data Sheet
according to Regulation (EC) No. 1907/2006
FabConstruct 3D SCANNING SPRAY (Mattierungsspray)
2Page v. 11
Hazard statements
H222 Extremely ammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
Precautionary statements
P102 Keep out of reach of children.
P210 Keep away from heat. No Smoking.
P211 Do not spray on an open ame or other ignition source.
P251 Do not pierce or burn, even after use.
P271 Use only outdoors or in a well-ventilated area.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing.
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50°C/122 °F.
P501 Dispose of contents/container to industrial incineration plant.
2.3. Other hazards
No information available
3. Composition/information on ingredients
3.2. Mixtures
Hazardous components
Full text of H and EUH statements: see section 16.
4. First aid measures
General information
First aider: Pay attention to self-protection!
After inhalation
Provide fresh air. In case of accident or unwellness, seek medical advice immediately (show directions for use or safety data sheet
if possible).
CAS No. Chemical name Quantity
EC No. Index No. REACH No.
Classication according to Regulation (EC) No. 1272/2008 [CLP]
106-97-8 butane 50 - 60 %
203-448-7 601-004-00-0 01-2119474691-32
Flam. Gas 1; H220
74-98-6 propane 20 - 25 %
200-827-9 601-003-00-5 01-2119486944-21
Flam. Gas 1; H220
67-63-0 propan-2-ol; isopropyl alcohol; isopropanol 10 - 20 %
200-661-7 603-117-00-0 01-2119457558-25
Flam. Liq. 2, Eye Irrit. 2, STOT SE 3; H225 H319 H336
75-28-5 isobutane 2 - 4 %
200-857-2 601-004-00-0
Flam. Gas 1; H220
Revision date: 02.06.2017