Operator's Manual

7
7
1. Using a Phillips head screwdriver, detach the 2 attaching screws A-055
from the pad while turning the screws to the left (fig.44).
2. Fit the new pad to the end of the stock and tighten the 2 attaching
screws firmly.
REVERSING SAFETY BUTTON DIRECTION
The STF12 shotgun has a triangular and reversible safety button. The weapon
safety is on when the red line is concealed; for left-handed users, the safety
activation direction can be reversed by reversing the direction of the button.
Contact your dealer to make this change.
FITTING A SIDE SHELLS HOLDER
Shells holders can be fitted to the left side of the shotgun (contact your dealer for
more information).
1. To attach these holders with a pin punch, tap out the two trigger guard
pins (fig.45).
2. Locate the part on the left side of the shotgun, aligning the positions of
the holes (fig.46).
3. Insert the two specific pins through the frame, from the left, taking care
not to move the trigger guard (fig.47).
4. Tighten these two screws firmly into the shell holder plate.