Owner's Manual

3
3. Guide the assembly into the tracks on both sides of the receiver and snap the cocking
handle into position ( FIG.17 ).
4. Reinstall the trigger guard assembly and install the two trigger guard retaining pins ( FIG.18
).
5. Install the piston with the hollow end forward, install the barrel, after which slide the forend
on the magazine tube and screw on the forend cap.
STOCK MODIFICATION
On H4 shotguns, a set of stock spacers give the possibility to modify the drop and the deviation of
the stock.
Please see your gun dealer to fit a new spacer if needed.
KINETIC RECOIL REDUCER
On H4 shotguns it’s possible to install a stock kinetic recoil reducer on the stock connecting rod.
Please see your gun dealer.