Manual

8
Avoid over-lubrification. A thin coat of FABARM gun oil will help prevent rust.
SHOTGUN REASSEMBLY
1. Put the recoil spring back in place on the magazine tube.
2. Place the bolt assembly on the end of action bar and don’t forget to put the locking bolt
in position first
( FIG.16 ).
3. Guide the assembly into the tracks on both sides of the receiver and snap the cocking
handle into position ( FIG.17 ).
4. Reinstall the trigger guard assembly and install the two trigger guard retaining pins
( FIG.18 ).
5. Install the piston with the hollow end forward, install the barrel, after which slide the
forend on the magazine tube and screw on the forend cap.
STOCK MODIFICATION (DROP AND DEVIATION)
On LION H3 shotguns, a set of stock spacers give the possibility to modify the drop and the
deviation of the stock.
Please see your gun dealer to fit a new spacer if needed.
KINETIC RECOIL REDUCER
On LION H3 shotguns it’s possible to install a stock kinetic recoil reducer on the stock connecting
rod.
Please see your gun dealer.