Manual
8
9
STOCK DROP MODIFICATION
On FABARM semiauto shotguns, it’s available a set of spacers to modify the
drop of the stock +/- 5mm ( 1/5 inch ) from the standard drop. To do it you
have to put the spacer around the stock tube between the receiver and the
stock. It’s also possible to modify +/-10 mm ( 2/5 inch ) the drop of the stock
tting two spacers between receiver and stock.
KINETIC RECOIL REDUCERS
On FABARM semiauto shotguns it’s possible to install the stock and forend
kinetic recoil reducer, each one weight 200 gr.
You can t the forend reducer instead of the forend cap, and the other in
the stock connecting rod after took out the pad.
ADJUSTABLE STOCK
For models equipped with an adjustable stock :
1. Using the appropriate ALLEN wrench, loosen the lock screws so the
cheekpiece can slide free of the buttstock ( FIG.22 ).
2. With the cheekpiece removed from the buttstock,use the appropriate
ALLEN wrench to move the 2 pivots to the right or the left and turn
the height adjustment screw to your preferred position ( FIG.23 ).
Ret the cheekpiece back on the buttstock by sliding it down on the
support posts (FIG.24).
3. Using the appropriate ALLEN wrench, retighten the lock screws.