Installation Guide

5
6
7
8
Hold the mirror against
the wall where you want
to install it, and mark
the wall at the top edge
of the mirror with your
pencil.
Using the results from
the Steps 3 and 4, measure
down from the top edge
mark to the center point
between the clips and
place another mark,
then from that mark
measure out to the
center of the clip body
on each side and mark
the wall in both spots.
Drill two holes in the
wall at the clip body
center locations.
Using your drill,
insert the anchor
bolts in the holes.
Anchor
2
Page