Owners manual

Installation Instructions
15 GMC HD Premium Front Bumper
Product Number: C3150, C3151, C3152
Application: 2015 GMC HD
Copyright 2008 Fab Fours, Inc. Page 3 of 20 C315X_REV_A
Parts List
 C315X replacement bumper
 A315X brackets (20679 and 20680)
 A305X-HW fastener kit
 Fog lights and turn signals (61349 and 61350)
 Welded bolt strips (20296)
 Instruction Manual
Tools Required
 Socket Wrench with Extension (Ratcheting wrenches may also be
convenient)
 7mm, 10mm, 15mm, 18mm, 19mm, 3/4 Sockets and Box End
Wrenches
 Flat head screw drivers
 Floor jack, jack stands, and/or a wood block.
 9/16 drill bit w/ drill
II. Removal of OEM Bumper
Note: Save all OEM parts until installation is complete!
A. Open hood and locate the twelve push pins on radiator cover.
Using a flat head screw driver or similar tool, pull the head of the
push pins up, remove push pin and lift radiator cover off. This will
allow access to top grill bolts (Ref. Figure 1).
Figure 1