Owners manual

Installation Instructions

Ford Winch Bumper

Product Number: A1250-A1252

Application: ’05-’07 Ford Super Duty

V. Bumper Installation

 Optional: If installing winch and roller fairlead into bumper, do it at this

time. Follow the winch manufacturer’s instructions for installation. If you are

installing a winch with a pulling capacity of 12,000 lbs. or greater, the front

face mounting holes must be used.

If not installing a winch, a license plate may be installed onto the front face of

the bumper using the provided ¼” hardware.

1. Insert the bumper mounts into the frame rails as shown below:

Figure 7 - Bracket Orientation

2. Fasten the brackets to the frame with the provided ½” bolts, washers, lock

washers and nuts on the front flange. Repeat for other side.

Figure 8 - Intermediate Bracket Installation