Owners manual

Installation Instructions
Ford Winch Bumper
Product Number: A1250-A1252
Application: ’05-’07 Ford Super Duty
Copyright 2011 Fab Fours, Inc. Page 11 of 11 A1250 (B)
5. Adjust the bumper to achieve good visual alignment by adjusting up/down
and left/right alignment with bumper to mounting bracket hardware.
a. If the bumper needs significant in-out adjustment, contact Fab Fours
and the number below.
6. Tighten all fasteners fully; beginning with frame mounts. Then tighten all
mount-to-bumper fasteners.
7. Connect wiring harnesses to lights as shown in wiring diagram.
8. Verify proper operation of lights. Note: Turn indicators should be dim during
“running” condition and flash bright for turn.
VI. Maintenance/Care


Periodically check and tighten all fasteners.


Stripped, fractured, or bent bolts or nuts need to be replaced.
VII. Contact Information
Fab Fours Inc. Phone [phone]
1312 Camp Creek Rd. Fax [phone]
Lancaster, SC 29720 Email [e-mail]
More than expected… Better than expected