Owners manual

ManualsBrandsFab Fours ManualsAutomotiveDR10-A2952-1 Premium Heavy Duty Winch Front Bumper

II.

Tools Required

Installation Instructions

Dodge Winch Bumper

Product Number: A2950-A2952

Application: 2010+ Dodge Ram HD





Electric Drill





5/8” Drill bit





Electric Hand Grinder





Pry Bar





Socket Wrench With

Extension





10mm or 13mm Socket

(year dependent)





18mm Socket





3/4” Socket





3/4” Open End Wrench





7/16” Open End Wrench





3/8” Open End Wrench





1/8” Allen Wrench





5/32” Allen Wrench





Center punch





Hammer





Tin Snips

III.

Vehicle Preparation

1. (DIESEL ONLY) Open the hood and remove the dust shield covering the

radiator and intercooler assembly.

2. (DIESEL ONLY) Remove the two screws attaching the intercooler to the top

of the core support.

3. (2013+ DIESEL ONLY) Unbolt intercooler mount brackets from frame rails

and disconnect intercooler hoses to move intercooler out of the way to access

the bolt strips.

Figure 1 – Intercooler Fasteners