Owners manual

Installation Instructions

Dodge Winch Bumper

Product Number: A2950-A2952

Application: 2010+ Dodge Ram HD

9. Install the Fab Fours fog lights onto the mounting brackets as shown below

using the #8 button head screws, washers, and nylock hex nuts.

Figure 8 - Fog Light to Bracket Installation

10. Install the fog light and bracket into the bumper using the remaining two holes

available in the light insert. Use the 1-1/2” length ¼” stainless steel button

heads with ¼” washers and nylock nuts:

Figure 9 - Fog Light Installation

11. Repeat steps 8-10 for other side.





Do not connect wiring harnesses to lights until bumper is installed.