Owners manual

Installation Instructions
Chevy Winch Bumper
Product Number: A2750-A2752
Application: ’11 Chevy 2500-3500 HD
Copyright 2012 Fab Fours, Inc. Page 3 of 12 A275X (B).doc
II. Tools Required


Multi meter or circuit test
light


Socket Wrench With
Extensions


5/32” Allen Wrench


1/8” Allen Wrench


10mm Socket


15mm Socket


18mm Socket


21mm Deep Socket


7/32” Socket


3/4” Socket


18mm Open End Wrench


3/4” Open End Wrench


7/16” Open End Wrench


3/8” Open End Wrench


Phillips Screwdriver


Hammer
III. Vehicle Preparation
1
1
.
.
Detach the splash mat from the body by removing the 3 plastic push clips
from the center splash guard and outer cooling supports.
Figure 1 – Clip Locations
2
2
.
.
Remove the two screws per side connecting the plastic inner fender to the
bumper. (10mm)
CLIP
LOCATIONS